V570

Can I mix partial containers of V570 or Pancrete?

No. Neither V570 nor Pancrete can be partially mixed due to specialized ratios, so only complete containers may be used. The user should determine what size containers he needs for the job at hand. Our customer service department can provide easy assistance.

By |February 5th, 2018|, |Comments Off on Can I mix partial containers of V570 or Pancrete?

How is V570 packaged?

V570 is packaged in pints, quarts, gallons and 5-gallon containers. The procedure would be to calculate out how much you would need first. For example, if you calculate you have 150 square feet of area to cover, you should purchase 3 quarts of V570, and mix them up as you go along.

By |February 5th, 2018||Comments Off on How is V570 packaged?

How much V570 do I need?

One gallon of V570 should coat about 100 square feet of metal. The user should not mix any more product than what he would use in a 30 minute time period after mixing or the product will set up in the can.

By |February 5th, 2018||Comments Off on How much V570 do I need?

How long will V570 last?

V570 will not rust or wear out. It is chemically resistant to most coil cleaners, provides a permanently smooth surface. It should outlive your equipment.

By |February 5th, 2018||Comments Off on How long will V570 last?

How long will my unit be out of service when I use V570?

Metal preparation is the most time-consuming part of the process. You’ll wet-vac the unit, and wire brush loose and flaking metal, then apply V570 to the vertical surfaces you wish to coat. Then you would pour the Pancrete into the pan. You can put the unit back into service in as little as 4 hours depending on temperatures.

By |February 5th, 2018||Comments Off on How long will my unit be out of service when I use V570?

What are the differences between V570 and Pancrete?

V570 and Pancrete share the same corrosion water resistance. However, Pancrete, when mixed, has a consistency of water, so it flows easily, coating the entire drain area, and easily getting into hard-to-reach areas. V570 is more viscous and is engineered to coat the vertical surfaces of metals.

By |February 5th, 2018|, |Comments Off on What are the differences between V570 and Pancrete?

How does V570 stand up to strong industrial chemicals?

Both alkaline and acid coil cleaners are very corrosive to galvanizing and aluminum, and coatings as well. V570 is engineered to have no effect from chemicals, even concentrated coil cleaners normally aggressive to metals. In this regard, V570 is similar to Pancrete.

By |February 5th, 2018||Comments Off on How does V570 stand up to strong industrial chemicals?
Go to Top